If you have a Samsung ML 1865W printer and you want to reset its firmware, you may need to download a specific file and follow some steps. Resetting the firmware can help you solve some issues with your printer, such as red light blinking or not printing the last page. However, you should be careful when doing this, as it may void your warranty or cause some malfunctions. Here is a guide on how to reset Samsung ML 1865W printer firmware.
What You Need
A Samsung ML 1865W printer connected to your PC or wireless network.
A toner cartridge with a tape covering the chip on the right side.
A sheet of paper in the printer.
The correct reset file for your printer's version. You can find out your printer's version by printing a configuration page or by removing the right cover of your printer. The version should be something like v0.82 or v30. You can download the reset file from various sources online, such as OpenSea[^1^], Trello[^2^], or SoundCloud[^3^]. Make sure you get the right file for your version.
What You Do
Turn off your printer and take out the toner. Cover the chip on the right side of the toner with a piece of tape. Return the toner back inside.
Turn on your printer and wait for it to initialize.
Extract the downloaded reset file somewhere on your PC. Depending on your printer's version, go to the \\\\166x folder and next to either \\\"FIX_ML1660_v_82_00_78_rar\\\" or the \\\"V30\\\" folder. There should be two files inside - \\\"usbprn2.exe\\\" and \\\"ML 1160-30.fls\\\" (or \\\"FIX_ML-1660_v.82.00.78.fls\\\" in the other folder).
Do not turn off your printer from now on. If you disconnect your printer during the reset, your printer may become unusable.
Run \\\"usbprn2.exe\\\" as administrator. A command prompt window should open.
Type \\\"ML 1160-30.fls\\\" (or \\\"FIX_ML-1660_v.82.00.78.fls\\\") and press Enter. The reset process should start and you should see some messages on the command prompt window.
Wait for the process to finish. It may take a few minutes. Do not interrupt it or turn off your printer.
When the process is done, you should see a message saying \\\"Download Complete\\\" on the command prompt window.
Turn off your printer and wait for 10 seconds. Then turn it on again.
Your printer's firmware should be reset now. You can check it by printing a configuration page or by looking at the status light. It should be green instead of red.
This is how you can reset Samsung ML 1865W printer firmware using a file and some steps. This may help you fix some problems with your printer, but it may also cause some risks. You should only do this if necessary and at your own responsibility. If you have any questions or doubts, you can contact Samsung support or visit their website for more information.
Why Reset Samsung ML 1865W Printer Firmware
Resetting Samsung ML 1865W printer firmware can be useful in some situations. For example, if your printer is showing a red light that indicates low toner level, but you know you still have enough toner left in the cartridge, resetting the firmware can help you bypass the toner counter and continue printing. This can save you money and time by not having to buy a new cartridge or replace the chip on the old one.
Another reason to reset Samsung ML 1865W printer firmware is if your printer is not printing the last page of a multi-page document. This can be annoying and frustrating, especially if you need to print important documents. Resetting the firmware can fix this issue and make your printer print all the pages correctly.
Risks of Resetting Samsung ML 1865W Printer Firmware
While resetting Samsung ML 1865W printer firmware can have some benefits, it can also have some risks. One of the main risks is that it can void your warranty. Samsung may not provide any support or service for your printer if you reset its firmware without their authorization. This means that if your printer has any problems or defects after the reset, you may not be able to get any help or compensation from Samsung.
Another risk of resetting Samsung ML 1865W printer firmware is that it can cause some malfunctions or errors with your printer. For example, your printer may not recognize the toner cartridge properly, or it may print with poor quality or incorrect colors. Resetting the firmware may also affect the compatibility of your printer with other devices or software. You may not be able to use some features or functions of your printer after the reset. 061ffe29dd